Spacetalk Adventurer

Spacetalk Adventurer is the next generation 4G all-in-one smartphone watch and GPS device for kids aged 5-12. Fun, fashionable, safe and technologically advanced, Spacetalk Adventurer is a totally new design build and technology platform, with exciting new features that deliver confidence for the child, enhanced controls for the parent, and new functionalities for the family to stay connected.

Spacetalk Adventurer’s enhancements include:
• 4G mobile network connectivity. Customised and highly advanced 4G mobile antenna design that meets stringent 4G network band requirements for ANZ, UK and most of Europe, and supports 4G (LTE, VoLTE; 7 bands) and 3G (WCDMA; 3 bands). This is a significant and hard to achieve technology breakthrough for a wearable device, and makes it more efficient to roll out with mobile network operators as there is no need to make different variants for each
• Built kid-tough(er), with scratch-resistant safety gorilla glass and a hypoallergenic silicone band specifically designed to stand up to tough kid use
• IP67 water resistance
• Four on-trend speckled-finish body colours – midnight, coral, mist and ocean – able to be personalised through detachable interchangeable straps
• Largest capacity battery in the category – 750mA
• Heart rate sensor, allowing for a new generation of health, fitness and emotional wellness features to be provided both on the watch and through the new Spacetalk App
• Hi-res 5MP camera
• Improved high accuracy GPS locator with licensed Google Maps
• Large OLED screen with high brightness yet low energy consumption
Adventurer is rated as IP67 water and dust resistant. It has been tested submerged at a depth of 1m for 30mins. This rating will means that Adventurer will be more tolerant to splashes, accidental submersion and rain. However we do not recommend actively swimming, bathing or showering with Adventurer fitted.
To wake Spacetalk Adventurer double tap anywhere on the screen.
The power button on Spacetalk Adventurer is located on the bottom cover next to the charging contacts.
Yes, Adventurer will work on most 2G, 3G and 4G mobile networks In New Zealand, Asia and Europe. It may not work reliably in the USA or Canada because of different mobile frequency bands.

Adventurer model ST2-4G-1 will work on 4G Bands: B1/B3/B5/B7/B8/B20/B28 and 3G Bands:B1/B5/B8. Where GSM networks are still available 2G: 900/1800MHz.

Check this link to find your country and identify the mobile frequency bands in use.
Short location update intervals (e.g. 5 minutes) are not recommended for day to day use as they will consume the battery faster. For the best battery performance, we suggest using Adventurer's Location on Demand feature in combination with a longer update interval or interval updates turned off.

Keeping Adventurer software up to date will also ensure you can benefit from the latest battery optimisations.

If you are using a pre-paid SIM card, it is also recommended to check that your SIM card has credit balance on it as Adventurer’s battery life can be impacted due to data connectivity issues.
On Adventurer, swipe from top to bottom on the touch screen to reveal the battery level, network signal strength, settings, volume and brightness control.
You can check the battery level in a variety of ways. On Adventurer swipe from top to bottom on the touch screen to reveal the battery level. From the Spacetalk app, tap the 3 bars in the top left corner and then tap on the device you wish to view the battery percentage for.
The supplied charging cradle magnetically attaches to the rear of Adventurer. Plug one end of the supplied USB-C cable into the charging dock and the other end into a USB power source.
To charge your Adventurer, it is recommended to connect the USB cable to a 5V/1Amp USB power supply.
Yes, Adventurer has a 4G mobile phone built into the watch. You will require a Nano SIM card, which is the smallest of the SIM cards available. Your provider’s plan should include calls, SMS and 1GB of data per month.
Yes, Adventurer will work on all 3G and 4G mobile networks in Australia and New Zealand.
On Adventurer swipe from top to bottom on the touch screen to reveal the control center. Then tap 'Settings', then information and the watch's number will be displayed under 'Phone Number'. In certain cases the phone number may not register to the 'Phone Number' field. This is not a defect but rather a network operator issue where the numbers are dynamically assigned to the SIM card. If this occurs, check the Spacetalk app Settings menu for the phone number of the watch. Alternatively make a call to a contact and get them to recognise your Caller ID and provide it to you.
Adventurer rejects SMS messages from unknown numbers. These rejected messages are forwarded to the Spacetalk app and the user will receive a notification of the blocked message. When the Adventurer's balance is low most operators send an SMS to inform you.
On Adventurer swipe from top to bottom on the touch screen to reveal the battery level, network signal strength, settings, volume and brightness control.
The data connection is very important for normal operation of Adventurer. To check if there is an active data connection on Adventurer, swipe from top to bottom to reveal the control center. Then tap 'Settings', then information and under 'Network State' it should say connected if there is an active data connection.
An unlimited number of contacts can be added to each Adventurer watch. Contacts are added in the Spacetalk app. To do this tap the 3 bars in the top left corner. Tap on the device then tap 'Phone Contacts'. To add a new contact tap on the plus symbol. During set-up, a contact can be selected from your list of contacts on your smartphone or by adding a new contact. Contacts can also be flagged as emergency contacts for use when the Adventurer's SOS function is activated.
When an incoming call is received, Adventurer's screen will illuminate and details of the caller will be displayed. A green 'answer' button or red 'reject' button will be displayed.
Outgoing calls are limited to the list of contacts set up by the guardian using the Spacetalk app. From the clock screen on Adventurer, swipe right to left until you reach the Call app. Tap on Call to select from a list of contacts that your child is permitted to call.
Adventurer can be restricted to receive incoming calls and SMS/MMS messages only from people listed in Adventurer's contact list. In the Spacetalk app tap the 3 bars in the top left corner. Tap on the device then tap 'Phone Contacts'. There is then an option to block calls from unknown numbers. This is set by default but guardians can choose to disable this feature to allow all incoming calls and messages.
Parents and guardians can define classroom periods that make Adventurer distraction free. When in School Mode, Adventurer is effectively a watch and other functions will be disabled. During School Mode, parents have complete control and can choose to selectively enable or disable features. For example, parents may choose to enable the step counter feature, while disabling the ability to make and receive calls. There is no risk of classroom distractions because Adventurer is silent in School Mode.
School Mode is a feature activated in the Spacetalk app. To activate School Mode tap the 3 bars in the top left corner. Tap on the device then tap 'School Mode'. To set up a new School Mode simply tap 'Add' located in the top right corner and enter your desired preferences.
To disable or enable features in the Spacetalk app tap the 3 bars in the top left corner. Tap on the device then tap 'School Mode'. Tap on a previously set School Mode, then tap 'Enable Features'. To enable a feature while Spacetalk is in School Mode simply turn the corresponding switch to on.
When School Mode is active on Adventurer two pencils will appear in the middle of the clock screen.
When first setup, Adventurer defaults to 15min periodic location updates. This can be changed between 5m and 1hr. It can also be turned off completely.

An aggressive periodic location update, for example 5min, will consume much more battery power than a 1hr location update.

You can completely disable the periodic location updates and use the Location on Demand feature.
In your Spacetalk app, you can find a radar button at the top right of the map on the Location tab. Tap it, and the Spacetalk app will start scanning for the watch user's GPS location. Soon, you'll have the most up-to-date location of the watch user.
Safe Zones are geo areas that are setup in the Spacetalk app. When the watch user arrives and leaves these pre-programmed zones, an optional notification will be sent to the Spacetalk app.
To set up a new Safe Zone in the Spacetalk app tap the 3 bars in the top left corner. Tap on the device then tap 'Safe Zones'. Tap 'Add Place' and enter the address of the desired location. Note that for Safe Zones to work you must also enable automatic location updates.
To set up alerts for Safe Zones, in the Spacetalk app tap the 3 bars in the top left corner. Tap on the device then tap 'Safe Zones'. Tap 'Add Alert'. From here, multiple Safe Zone notifications can be configured and these can be customised to suit particular days. Note that for Safe Zones to work you must also enable automatic location updates.
In the Spacetalk app, tap the 3 bars in the top left corner. Tap the device and under the 'Phone Contact' section select a previously added contact and then mark this contact as an Emergency Contact.
In the Spacetalk app, tap the 3 bars in the top left corner. Tap the device and under the 'Phone Contact' section tap on Edit. Then tap and drag a contact in the list to change the sequence.
Step count goals are set through the Spacetalk app. To set a goal tap the 3 bars in the top left corner. Tap the device and under 'fitness' tap the settings icon to set a step count goal.
From the clock screen on Adventurer, swipe right to left until you reach the Message app. Tap on the message icon, then tap on the message thread you wish to reply to. To start a new message thread tap on the pencil symbol in the top right corner.
Messages can be viewed on Adventurer by tapping on the message menu icon.
When Adventurer receives a SMS message from an unknown number, it redirects it to the Spacetalk app. The message contents can be viewed in the Notifications within the Spacetalk app.
You may customise your own preset messages in the Spacetalk app. In the Spacetalk app, tap the 3 bars in the top left corner. Tap on the device, then tap on Chat/SMS Keyboard. From here you may add, delete and reorder messages to suit the Spacetalk user.
Yes, you can send recorded audio and attach pictures and short video's from the gallery by MMS. When creating a new Message on Adventurer, tap the 3 circles to revel the Microphone button. The user can record an audio message up to 15 seconds in length. Tap once to start recording and tap again to end.
On Adventurer, from the clock screen, swipe right to left until you reach the Weather app. It will show the weather now, hourly and daily forecast.

The Spacetalk app can also check the weather at the watch users location by tapping on the weather icon in the top right hand corner of the Location tab.
From the clock screen on Adventurer, swipe right to left until you reach the Alarm app. Tap on the '+' in the top right corner then enter your desired preferences.
To delete an alarm, from the clock screen on Adventurer, swipe right to left until you reach the Alarm app then hold down on the alarm you wish to delete.

To edit an alarm, from the clock screen on Adventurer, swipe right to left until you reach the Alarm app then tap on the alarm you wish to edit. Tap edit and update your desired preferences. Tap on the tick to save your new preferences.
Yes. Bluetooth connectivity is supported on Adventurer and the user is able to connect compatible devices for example Bluetooth headsets, Air pods and in-car Bluetooth systems. Currently Adventurer does not support Bluetooth enabled hearing aids which are medical devices and require a special type of Bluetooth connection.
On Adventurer, swipe from top to bottom to reveal the control center. Tap 'Settings', then scroll down and tap Bluetooth. Place your Bluetooth device into pairing mode. Refer to the manufactures instructions of your Bluetooth device for further information how to do this. Once the Bluetooth device is in pairing mode, on Adventurer toggle the switch to "on" then tap the plus symbol in the top right corner. Adventurer will start to scan for nearby Bluetooth devices. If the Bluetooth device is compatible, it should quickly appear. Tap the found device to complete pairing.
It is possible to share access to Spacetalk Adventurer with multiple trusted users. NO ADDITIONAL SUBSCRIPTION is necessary for secondary accounts holders if they are only using sharing. To share Spacetalk Adventurer, please follow these steps:

Primary Account Holder
1. In your Spacetalk app, tap the 3 bars in the top left corner. Tap 'My Account', then tap 'Manage Devices'
2. Tap the device you wish to share, then tap 'Share Access'
3. If the person you wish to share Spacetalk Adventurer with is already listed as a contact then tap 'select contact'. Alternatively tap 'Enter Email' and enter the email address of the person you wish to share Spacetalk Adventurer with.

Secondary Account Holder
1. Use the link in the invitation to download the Spacetalk app
2. Open the app and create a new Spacetalk account. (Note: when creating your new Spacetalk app account, you must use the same email address the invitation has been sent to)
3. Once you have created a Spacetalk account and are logged in, tap the 3 bars in the top left corner. The invitation should appear under 'My Devices'
4. Tap on the invitation and it will allow you to Accept or Deny. Once accepted you will have shared access to that Spacetalk Adventurer
In the Spacetalk app, tap the 3 bars in the top left corner. Tap 'My Account', then tap 'Manage Devices'. From here you can see a list of My Devices and Shared Devices – where you can remove the shared access if required
Spacetalk Holdings Pty Ltd warrants Spacetalk Adventurer for one year and in-box accessories for one year against defects in materials and workmanship commencing from the date of retail purchase. Spacetalk accessories purchased separately are warranted against defects in materials and workmanship for six months from the original date of purchase.

Spacetalk’s express warranty is subject to certain exclusions, as set out in the warranty. For example, Spacetalk does not warrant the Spacetalk Adventurer watch or accessories for normal wear and tear, nor damage caused by accident or abuse.

Our goods and services come with guarantees that cannot be excluded under the Australian Consumer Law. For major failures with the service, you are entitled:
• to cancel your service contract with us; and
• to a refund for the unused portion, or to compensation for its reduced value.

You are also entitled to choose a refund or replacement for major failures with goods. If a failure with the goods or a service does not amount to a major failure, you are entitled to have the failure rectified in a reasonable time. If this is not done, you are entitled to a refund for the goods and to cancel the contract for the service and obtain a refund of any unused portion. You are also entitled to be compensated for any other reasonably foreseeable loss or damage from a failure in the goods or service.

Spacetalk’s warranty on the Spacetalk watch and its accessories contains additional relevant provisions, including concerning how to make a warranty claim. The full warranty can be downloaded from the download section of this site.
After reading through the FAQs if you are still experiencing a problem, please visit the Troubleshooting page for further guidance and directions. If further assistance is needed please contact our customer support team.
Adventurer and the Spacetalk apps have been developed at our companies head office in Australia.

Our systems incorporate industry best practice data security throughout and cannot be hacked or spoofed like other products in this category. All data transmitted between Spacetalk devices and our Spacetalk apps use enterprise-grade encryption. Data stored on our servers is encrypted and hosted in government and bank grade security centers in Australia and United Kingdom.

Spacetalk has been developed by SPACETALK LTD (ASX:SPA), an Australian publicly listed company and a pioneer and leader in school communications systems since 2003. SPACETALK has built a reputation for the highest-level data security and privacy through its schools business unit.

We are fully GDPR compliant and are constantly updating our systems and practices to ensure our users' data security and privacy.

Our full privacy policy can be downloaded from the Download section located in our Support pages.
Yes, Spacetalk takes your privacy very seriously. Your personal information will always be stored domestically within Australia and the United Kingdom on highly secure servers. Please review our privacy policy for further information.
Adventurer has been manufactured using safe and hypoallergenic materials and fully complies with the EU Restriction on Hazardous Substances (RoHS) directive 2015/863/EU. Adventurer has also been extensively tested and is compliant with the European Union REACH regulations and has been tested and found compliant with 209 substances of very high concern, Nickel, Organic Tins, Polycyclic Aromatic Hydrocarbons (PAH). Adventurer has also been tested and complies with the EU POPs regulations for short chain chlorinated paraffin (SCCP’s). Details of these reports can be found in our EU Declaration of Conformity that can be downloaded from the download section of this website.
There are very strict international standards which govern the amount of radiation exposure against defined limits. Australia is among 40 other countries that adopt high standards designed to reduce exposure to harmful radiation.

The actual test is called Specific Absorption Rate (SAR) and this rate needs to be below 2W/kg averaged over 10g body tissue for proximity to head and 4W/kg averaged of 10g of body tissue for wrist worn. The highest measurement when Adventurer was tested was 0.85 W/Kg for front of face, and 0.60 W/kg for wrist worn.

SAR is among one of the very important tests that must be completed in order to be able place the Australian Regulatory Compliance mark (shown below) on our product. Adventurer displays this RCM mark in the Information menu under Regulatory Compliance section. As a publicly listed company, SPACETALK LTD has responsibility to conduct very thorough due-diligence on every product we offer for sale.

Adventurer is a radio transmitter and receiver and is designed not to exceed the limits for exposure to radio waves recommended by international guidelines. Care should be taken when using Adventurer in the situations described below:

AIRCRAFT
Switch off your wireless device whenever you are instructed to do so by airport or airline staff.
HOSPITALS
Mobile phones should be switched off wherever you are requested to do so in hospitals, clinics or health care facilities. These requests are designed to prevent possible interference with sensitive medical equipment.
PETROL STATIONS
Obey all posted signs with respect to the use of wireless devices or other radio equipment in locations with flammable material and chemicals. Switch off your wireless device whenever you are instructed to do so by authorized staff.
INTERFERENCE
Care must be taken when using the phone in close proximity to personal medical devices, such as pacemakers and hearing aids.
For Pacemakers:
Pacemaker manufacturers recommend that a minimum separation of 15cm be maintained between a mobile phone and a pacemaker to avoid potential interference.
Adventurer fully complies with all mandatory regulatory standards for sale of products in Australia and New Zealand. The Australian Communications and Media Authority (ACMA) are responsible for setting standards that all mobile communication products must be tested against. These tests include Electrical Safety, Electromagnetic Compliance (EMC), Specific Absorbtion Rate (SAR), Electromagnetic Radiation and various mobile network interoperability tests to name a few. Adventurer carries the Regulatory Compliance Mark (RCM) which is represented by a triangle with a small tick to prove it.

On Adventurer from the clock screen, swipe from top to bottom to reveal the control center. Then tap 'Settings' scroll through the list to 'Factory Reset'. Adventurer requires a PIN number to avoid accidental reset. The PIN number is the last four digits of the IMEI number. The IMEI number can be found in the Information menu.

Important: After Adventurer has been reset, the initial set-up procedure and watch pairing with the Spacetalk App will need to be repeated. If Adventurer has been paired previously with the same account, when performing the pairing process the Spacetalk app will allow the apps previous settings to be restored.
Adventurer will automatically check for a software update in the early hours of the morning. For this to occur Adventurer should be left powered on and charging overnight. If an update is available, Adventurer will automatically download and install it overnight.

You may also check manually to see if there are any updates. To do this on Adventurer, from the clock screen, swipe from top to bottom to reveal the control center. Then tap 'Settings' then 'Software Update' and your watch will begin to check for any available updates.

Downloading of updates consumes mobile network data and may result in additional charges.
The watch face can be changed remotely from the Spacetalk app. A digital and analogue watch face can be selected and a custom wallpaper image can be selected.
Adventurer will automatically update the time and the date from the network. There are no adjustments necessary.

In some cases (i.e. living close to the border between two time zones), Adventurer may detect an incorrect time. To solve this problem, you can also set the time and date manually. From the clock screen, swipe from top to bottom to reveal the control center. Tap 'Settings' then 'Date & Time' and toggle the 'Automatic date & time' switch to off.
Yes, Wi-Fi is used as part of Adventurer 's positioning system however connections to regular Wi-Fi Access Points is currently not supported.
To activate flight mode on Adventurer from the clock screen, swipe from top to bottom to reveal the control center . Tap 'Settings' then toggle the 'Flight Mode' switch to on.
The Spacetalk app is available for download from the iOS App Store or the Google Play Store. Other platforms are currently not supported. Search for Spacetalk in either store.
An unlimited number of contacts can be added to each Adventurer watch. Contacts are added in the Spacetalk app. To do this tap the 3 bars in the top left corner. Tap on the device then tap 'Phone Contacts'. To add a new contact tap on the plus symbol. During set-up, a contact can be selected from your list of contacts on your smartphone or by adding a new contact. Contacts can also be flagged as emergency contacts for use when the Adventurer's SOS function is activated.
Contacts can only be deleted through the Spacetalk app. To do this tap the 3 bars in the top left corner. Tap on the device then tap 'Phone Contacts'. In the 'Phone Contact' list, select the contact you wish to delete. Remove contact will appear at the bottom of the app screen.
Phone Contacts are the people you allow your child to call or receive calls from and also send and receive SMS or MMS messages. These Phone Contacts do not necessarily need to have the Spacetalk app installed on their smartphone to call or send SMS/MMS messages.

Chat contacts are restricted to people who have the Spacetalk app installed or other Spacetalk devices. You can also share your group or huddle with other Spacetalk app or Spacetalk device users. A sharing code can be found in the My Account section of the Spacetalk app.
With Adventurer and the Spacetalk app, you can now create a chat group to send messages to friends and family who are also using the Spacetalk app and devices. You can create one-to-one private chats, or chat groups.
The new Chat feature will allow you to create group messages with friends and family and can support one-to-one or one-to many communications.

Message app is the more traditional SMS and MMS messaging functionality that supports one-to-one messaging.
In the Spacetalk app tap the 'Contact' symbol in the bottom right corner of the screen. Tap the 'plus' symbol. From here you will be able to invite a contact through email or by entering the persons Spacetalk ID
Once you have added a contact to Chat in the Spacetalk app, tap the 3 bars in the top left corner. Tap on the device then tap 'Chat Contacts'. Tap on the plus symbol then select the contact you wish to add to your Adventurer.
No. The Chat contacts and Phone contacts are a different set of contacts and need to be setup independently.
On Adventurer tap ‘Tap to pair’ then tap start. A QR code should appear on the watch. Now on the Spacetalk app, select ‘Add New Device’ from the app menu and tap the image of Spacetalk Adventurer. Set up the watch user‘s profile, then tap ‘Continue’. Scan the QR on the Adventurer using your mobile phone’s camera and then confirm the pairing on Adventurer. Tap ‘Get started’ on Adventurer and then complete the setup process on the Spacetalk app.
The maximum number of devices that can be registered against a Spacetalk account is 5 Spacetalk Kids devices & 5 Spacetalk Life devices. Please note that the number of enabled devices is limited by the type of the subscription for that account.
The maximum number of devices that can be enabled on a Spacetalk account is 5 Spacetalk Kids devices & 5 Spacetalk Life devices.
It is possible to share access to Spacetalk Adventurer with multiple trusted users. NO ADDITIONAL SUBSCRIPTION is necessary for secondary accounts holders if they are only using sharing. To share Spacetalk Adventurer, please follow these steps:

Primary Account Holder
1. In your Spacetalk app, tap the 3 bars in the top left corner. Tap 'My Account', then tap 'Manage Devices'
2. Tap the device you wish to share, then tap 'Share Access'
3. If the person you wish to share Spacetalk Adventurer with is already listed as a contact then tap 'select contact'. Alternatively tap 'Enter Email' and enter the email address of the person you wish to share Spacetalk Adventurer with.

Secondary Account Holder
1. Use the link in the invitation to download the Spacetalk app
2. Open the app and create a new Spacetalk account. Note you must use the same email address the invitation has been sent to create your account
3. Once you have created a Spacetalk account and are logged in, tap the 3 bars in the top left corner. The invitation should appear under 'My Devices'
4. Tap on the invitation and it will allow you to Accept or Deny. Once accepted you will have shared access to that Spacetalk Adventurer
When you need to know where your loved one is, approximations are not good enough. As part as our commitment to safety, we utilise highly accurate location tracking systems. Unlike many other products on the market, we use a combination of Google-Maps powered Wi-Fi, cell tower triangulation and GPS to deliver the reliable locations, when you need it most. Part of your app subscription fee goes towards covering these geolocation fees.

Additionally, we take the security of your data extremely seriously. We use enterprise-grade server architecture to host our data to ensure that the highest safety protocols are followed. The hosting costs involved with these are also factored into your subscription.

We are also constantly updating our apps and product firmware with new features. To maintain our high quality control standards, our development team designs and writes all of this here in Australia, rather than outsourcing this work offshore. When you contact Spacetalk customer support, you talk to a real employee, someone who works with the product and prides themselves in providing the best possible outcome for our customers, someone that values the Spacetalk community.
Monthly subscriptions can be purchased for up to 2 devices or up to 5 devices. In Australia the price is AUD$5.99 and AUD$8.99 per month respectively. In New Zealand NZD$6.99 and NZD$9.99 respectively.
The primary Spacetalk account holder needs to have one active subscription to be able to set up and modify connected watches. Secondary Spacetalk account holders do not need to purchase a subscription if they are only sharing devices that a primary account holder has already set up.
Subscriptions can only be modified by the primary account holder that initiated the original subscription. To upgrade an existing subscription:

1. Open your Spacetalk app on your smartphone.
2. Make sure that the current Google Play/App Store account that is used on the phone is the same as the account that was used initially to purchase the subscription.
3. Tap the 3 bars in the top left corner and then tap 'My Account'
4. Tap 'Manage Subscription'
5. A list of the available subscriptions will be shown, select another subscription level and follow the prompts to complete the subscription upgrade.
Subscriptions can only be modified by the primary account holder that initiated the original subscription. To upgrade an existing subscription:

1. Open your Spacetalk app on your smartphone.
2. Make sure that the current Google Play/App Store account that is used on the phone is the same as the account that is used initially to purchase the subscription.
3. Tap the 3 bars in the top left corner and then tap 'My Account'
4. Tap 'Manage Subscriptions'.
5. A list of the available subscriptions will be shown, select another subscription level and follow the prompts to complete the subscription downgrade.
Cancellation of subscriptions are done through the respective app store using the primary account originally used to set up the subscription..

For iOS
1. Go to Settings > [your name] > iTunes & App Store.
2. Tap your Apple ID at the top of the screen.
3. Tap View Apple ID. You might need to authenticate your Apple ID.
4. Tap Subscriptions.
5. Tap the subscription that you want to manage.
6. Use the options to manage your subscription. You can choose a different subscription offering, or tap Cancel Subscription to cancel your subscription. If you cancel, your subscription will stop at the end of the current billing cycle.

For Android Phone
1. On your Android phone or tablet, open the Google Play Store.
2. Tap Menu and then Subscriptions.
3. Tap the subscription you want to cancel.
4. Tap Cancel subscription.
5. Follow the onscreen instructions.
It is possible to share access to Spacetalk Adventurer with multiple trusted users. NO ADDITIONAL SUBSCRIPTION is necessary for secondary accounts holders if they are only using sharing. To share Spacetalk Adventurer, please follow these steps:

Primary Account Holder
1. In your Spacetalk app, tap the 3 bars in the top left corner. Tap 'My Account', then tap 'Manage Devices'
2. Tap the device you wish to share, then tap 'Share Access'
3. If the person you wish to share Spacetalk Adventurer with is already listed as a contact then tap 'select contact'. Alternatively tap 'Enter Email' and enter the email address of the person you wish to share Spacetalk Adventurer with.

Secondary Account Holder
1. Use the link in the invitation to download the Spacetalk app
2. Open the app and create a new Spacetalk account. Note you must use the same email address the invitation has been sent to create your account
3. Once you have created a Spacetalk account and are logged in, tap the 3 bars in the top left corner. The invitation should appear under 'My Devices'
4. Tap on the invitation and it will allow you to Accept or Deny. Once accepted you will have shared access to that Spacetalk Adventurer
Adventurer and the Spacetalk apps have been developed at our companies head office in Australia.

Our systems incorporate industry best practice data security throughout and cannot be hacked or spoofed like other products in this category. All data transmitted between Spacetalk devices and our Spacetalk apps use enterprise-grade encryption. Data stored on our servers is encrypted and hosted in government and bank grade security centers in Australia and United Kingdom.

Spacetalk has been developed by SPACETALK LTD (ASX:SPA), an Australian publicly listed company and a pioneer and leader in school communications systems since 2003. SPACETALK has built a reputation for the highest-level data security and privacy through its schools business unit.

We are fully GDPR compliant and are constantly updating our systems and practices to ensure our users' data security and privacy.

Our full privacy policy can be downloaded from the Download section located in our Support pages.
Yes, Spacetalk takes your privacy very seriously. Your personal information will always be stored domestically within Australia and the United Kingdom on highly secure servers. Please review our privacy policy for further information.
Please refer to the Spacetalk Adventurer product page for the latest availability.
Adventurer comes in 4 different colour variants - Midnight, Coral, Mist & Ocean.
Our online store will accept Visa, Mastercard and American Express credit cards. You may also make purchases using your PayPal account.
Yes! We offer both Afterpay and ZIP payment solutions for purchases made through our online webstore.
Depending on the method of shipment chosen, deliveries can be up to seven days within Australia. Due to the small nature of our products we offer regular post and express post. These can be chosen during checkout.

You will receive an email notifying when your shipment has been dispatched. Generally, from order placement to shipping will be 2 business days.

Shipping times:-
+ Australia Post (parcel post) - allow 2-7 business days depending on the destination.
+ Australia Post (express post) - next business day to most metropolitan areas.
+ More information on the Australia Post network can be obtained from this link.
You will receive an email confirming your order has been placed. Please check your junk folder in case you have not received it. Once the shipment has been dispatched, you will also receive an email confirming the shipment has been sent and providing the tracking number for the shipment.
For online purchases through this website, we offer a 30 Day Satisfaction Guarantee. To be eligible for this guarantee, you must contact our Customer Support Team to request an RMA number within 30 days. For further details please see our returns policy in the download section at this link.
In the unfortunate event that you have a problem with your product, please check the troubleshooting guide on our website. If you continue to have a problem, please contact our support team.
SPACETALK's warranty period is 12 months from date of original purchase. Full warranty terms and conditions can be found on our Support site in the downloads section.
We have compiled a list of troubleshooting steps which is regularly updated. These troubleshooting steps contain further instructions including how to return the product for repair.
We have compiled a Quick-start Guide to help you get Adventurer and the Spacetalk app up and running quickly. Click here to download the Quick Start Guide.
To wake Spacetalk Adventurer double tap anywhere on the screen.
The power button on Spacetalk Adventurer is located on the bottom cover next to the charging contacts.
Short location update intervals (e.g. 5 minutes) are not recommended for day to day use as they will drain the battery faster. For the best battery performance, we suggest using Adventurer’s Location on Demand function in combination with a longer update interval or interval updates turned off.

Running the latest Adventurer software will keep you up to date with the very latest improvements and optimisations and some of these include battery life performance.

It is also recommend to check that your SIM card has credit balance on it as Adventurer’s battery life will be affected if your SIM card runs out of credit.
It is normal operation for the light on the Charging Cradle to be RED whilst charging Adventurer. A solid GREEN light indicates Adventurer is fully charged or the charging dock may not be connected securely to Adventurer. There should always be either a GREEN or RED light illuminated on the dock.
If there is no light on the charging dock then this indicates that the dock is not receiving any power. Check the USB power source is working and if possible try an alternate power source. Also check the USB cable for damage or breakage.
To charge Adventurer, it is recommended to connect the USB cable to a 5V/1Amp USB power source.
It is normal operation for the light on the Charging Cradle to be RED whilst charging Adventurer. A GREEN charging light indicates Adventurer is fully charged.

On Adventurer swipe from top to bottom on the touch screen to reveal the battery level.

If Adventurer does not appear to charge, follow these steps:

1. Inspect the four gold contacts on the Charging Cradle and on the rear of Adventurer for damage.
2. Ensure Adventurer is seated correctly on the charging cradle and the charging cradle is not upside down. The four gold contacts on the Charging Cradle should line up with the four gold contacts on the back of Adventurer.
3. Connect the charging dock to a USB power source. Once connected confirm the light on the charging dock is green. No light indicates possibly the USB power source or the USB cable maybe faulty.
4. attach the charging dock to Adventurer and confirm that the light turns to red after a few moments. This indicates that Spacetalk is charging.
5. Clean the gold contacts on the Charging Cradle and on Adventurer with a damp cloth. Ensure they are dry before proceeding.
6. Try to hold down the Power Button for 20 seconds to perform a soft reset.
When the dock is connected to the back of the watch, does the light illuminate Red? If not:-

1. Check to make sure the USB power source is working. A green light will indicate the charging dock is receiving power.
2. Ensure Adventurer is seated correctly on the charging cradle and the charging cradle is not upside down. The four gold contacts on the Charging Cradle should line up with the four gold contacts on the back of Adventurer.
3. Check the charging contacts on the dock. Are they clean and visually look in good condition?
4. Check the charging contacts on the Adventurer watch. Are they clean and visually look in good condition?
Depressing the Power Button on the underside of Adventurer for 20 seconds will perform a soft reset and will not wipe any user data.
On Adventurer from the clock screen, swipe from top to bottom to reveal the control center. Then tap 'Settings' scroll through the list to 'Factory Reset'. Adventurer requires a PIN number to avoid accidental reset. The PIN number is the last four digits of the IMEI number. The IMEI number can be found in the Information menu.

Important: Factory reset will wipe all user data including pictures and videos that may have been recorded. After Adventurer has been reset, the initial set-up procedure and watch pairing with the Spacetalk App will need to be repeated. If Adventurer has been paired previously with the same account, when performing the pairing process the Spacetalk app will allow the apps previous settings to be restored.
The microphone is very sensitive and under normal background noise levels, you should be able to hold the watch 20-30cm away from your mouth and be heard clearly by the receiver. When the background noise level is high, you may find that you need to hold Adventurer closer to your mouth.
On Adventurer from the clock screen, swipe from top to bottom to reveal the control center. Tap 'Sound' to reveal the volume slider control. If the speaker volume is low ensure that the screen protector isn't covering the speaker port.
On Adventurer from the clock screen, swipe from top to bottom to reveal the control center. Tap 'Brightness' to reveal the brightness slider.

In full sunlight conditions, the screen brightness maybe limited this is not a fault.
Adventurer's watch face can be changed remotely from the Spacetalk app. A digital or analogue watch face can be selected and a custom wallpaper image can be added as a background image.
Clean Adventurer's display gently using a damp cloth. Also, completely power down Adventurer by holding the power button for 20 seconds to do a soft reset. Restart Adventurer and check if it has improved.
While in a call, the volume control appears on Adventurer's screen. Adjust the volume using this control. Additionally ensure the screen protector is not covering the speaker port.
Adventurer has a high quality noise cancelling microphone that is designed for use 20-30cm from your mouth. Speak at normal volume levels into the microphone.
Adventurer can be restricted to receive incoming calls from people listed in Adventurer's contact list only. In the Spacetalk app tap the 3 bars in the top left corner. Tap on the device then tap 'Phone Contacts'. There is then an option to block calls from unknown numbers. This is set by default but guardians can choose to disable this feature to allow all incoming calls.
If your number is listed in the contacts on Adventurer and your call is rejected, please check your caller ID settings of your mobile phone. Adventurer detects who is calling from your caller ID and determines if it will permit the call or reject the call. No caller ID will cause automatic call rejection from the watch.
This is most likely due to the ring volume level turned down or off. On Adventurer from the clock screen, swipe from top to bottom to reveal the control center. Tap 'Sound' to reveal the volume slider.
The watch must be paired to the Spacetalk app first before contacts can be added. Follow the pairing instructions in the Quick Start Guide, or this troubleshooting section under Account and Adding a Device.
Adventurer has been specifically designed to operate on the all 3G and 4G Networks in Australia and NZ. In case you are experiencing poor coverage, check with your service provider about the coverage available in your area.
On Adventurer swipe from top to bottom on the touch screen to reveal the network signal strength. The network signal strength and the network name should be displayed. If it isn't, follow these troubleshooting steps:

1. Check that Flight Mode is not active.
2. Check to see if the SIM card has been inserted correctly. Follow the quick start guide instructions that can be obtained from the download section of this website.
3. Restart Adventurer by holding the power button for 20 seconds and after Adventurer has shut down, power Adventurer up again.
5. Confirm the SIM has been activated correctly. If in doubt, remove the SIM card from Adventurer and test it in another phone. Check that voice, SMS and data are working.
6. Confirm if the SIM has valid credit. If necessary, recharge the SIM using the operators recharge process.
7. If available, try another SIM card in Adventurer.
When you update settings in the Spacetalk app, it is normal that these may take a few minutes for settings to be updated on Adventurer.

If they don't update, please check that Adventurer has a network connection, has credit on the SIM card and has an active data connection. A quick way to test the data connection is to check the Weather.
Adventurer will automatically check for a software update in the early hours of the morning. For this to occur Adventurer should be left powered on and charging overnight. If an update is available, Adventurer will automatically download and install it overnight.

You may also check manually to see if there are any updates. To do this on Adventurer, from the clock screen, swipe from top to bottom to reveal the control center. Then tap 'Settings' then 'Software Update' and your watch will begin to check for any available updates.

Downloading of updates consumes mobile network data and may result in additional charges.
The Spacetalk app is available for download from the iOS App Store or the Google Play Store. Other platforms are currently not supported. Search for Spacetalk in either store.
Download and install the Spacetalk app from the appropriate store. When you first open the Spacetalk app it will prompt you to Register for a new account, alternatively Log In if you have an existing account.
It is possible to share access to Spacetalk Adventurer with multiple trusted users. NO ADDITIONAL SUBSCRIPTION is necessary for secondary accounts holders if they are only using sharing. To share Spacetalk Adventurer, please follow these steps:

Primary Account Holder
1. In your Spacetalk app, tap the 3 bars in the top left corner. Tap 'My Account', then tap 'Manage Devices'
2. Tap the device you wish to share, then tap 'Share Access'
3. If the person you wish to share Spacetalk Adventurer with is already listed as a contact then tap 'select contact'. Alternatively tap 'Enter Email' and enter the email address of the person you wish to share Spacetalk Adventurer with.

Secondary Account Holder
1. Use the link in the invitation to download the Spacetalk app
2. Open the app and create a new Spacetalk account. (Note: when creating your new Spacetalk app account, you must use the same email address the invitation has been sent to)
3. Once you have created a Spacetalk account and are logged in, tap the 3 bars in the top left corner. The invitation should appear under 'My Devices'
4. Tap on the invitation and it will allow you to Accept or Deny. Once accepted you will have shared access to that Spacetalk Adventurer
On Adventurer tap ‘Tap to pair’ then tap start. A QR code should appear on the watch. Now on the Spacetalk app, select ‘Add New Device’ from the app menu and tap the image of Spacetalk Adventurer. Set up the watch user‘s profile, then tap ‘Continue’. Scan the QR code on Adventurer using your mobile phone’s camera and then confirm the pairing on Adventurer. Tap ‘Get started’ on Adventurer and then complete the setup process on the Spacetalk app.
A particular Adventurer can be removed from the Spacetalk app using the following procedure.

In your Spacetalk app, tap the 3 bars in the top left corner and then tap 'My Account'. Then tap 'Manage Devices', select the device you wish to remove and then tap 'Remove Device'.
You can add several Adventurer devices, but you can only enable the number of devices according to your active subscription level. To enable devices, in your Spacetalk app, tap the 3 bars in the top left corner and then tap 'My Account'. Then tap 'Manage Devices', select the device you wish to enable and then toggle 'Enabled' to on.
Cancellation of subscriptions are done through the respective app store using the primary account that the subscription was created.

For iOS
1. Go to Settings > [your name] > iTunes & App Store. 2. Tap your Apple ID at the top of the screen.
3. Tap View Apple ID. You might need to authenticate your Apple ID.
4. Tap Subscriptions.
5. Tap the subscription that you want to manage.
6. Use the options to manage your subscription. You can choose a different subscription offering, or tap Cancel Subscription to cancel your subscription. If you cancel, your subscription will stop at the end of the current billing cycle.

For Android Phone
1. On your Android phone or tablet, open the Google Play Store.
2. Tap Menu and then Subscriptions.
3. Tap the subscription you want to cancel.
4. Tap Cancel subscription.
5. Follow the onscreen instructions.
An unlimited number of contacts can be added to each Adventurer watch. Contacts are added in the Spacetalk app. To do this tap the 3 bars in the top left corner. Tap on the device then tap 'Phone Contacts'. To add a new contact tap on the plus symbol. During set-up, a contact can be selected from your list of contacts on your smartphone or by adding a new contact. Contacts can also be flagged as emergency contacts for use when the Adventurer's SOS function is activated.
Contacts can only be deleted through the Spacetalk app. To do this tap the 3 bars in the top left corner. Tap on the device then tap 'Phone Contacts'. In the 'Phone Contact' list, select the contact you wish to delete. Remove contact will appear at the bottom of the app screen.
In the Spacetalk app, tap the 3 bars in the top left corner. Tap on the device then tap 'Phone Contacts'. Select a previously added contact and then mark this contact as an Emergency Contact.
In the Spacetalk app, tap the 3 bars in the top left corner. Tap on the device then tap 'Phone Contacts'. At the top of the screen, tap on Edit. Then tap and drag a contact in the list to change the sequence.

Spacetalk Adventurer (model ST2-4G-1) will work on all 3G and 4G mobile networks in Australia and New Zealand.

Choose a mobile sim plan that includes Voice, SMS/MMS and 1GB data from a provider you prefer.

Quick Start Guide Download
Setup Guide Download
Warranty Card Download
RMA Form Download
Returns Policy Download
Privacy Policy Download
Terms of Use Download
Cookie Policy Download
EU Declaration of Conformity Download

Spacetalk Holdings Pty Ltd

The Parks
Suite 13, 154 Fullarton Road
Rose Park SA 5067
Australia

Telephone: (AU) 1300 087 423
(NZ) 0800 087 423
(Int) +61 (8) 8104 9588

Email: support@spacetalkwatch.com

Normal Hours: Mon-Fri, 9am-5pm (AEST)

Customer Reviews

Based on 536 reviews
85%
(454)
12%
(62)
3%
(17)
1%
(3)
0%
(0)
G
G.
Great introduction

Excellent product. Great features. It was everything that we had hoped for and our child loves it.
A great introduction to a phone/smart device.
If it was waterproof it would be perfect.

C
C.S.
Extremely happy

I am extremely happy with this watch that I purchased for my Autistic twins, it has given me piece of mind as I can track where they are as they tend to abscond.
Would love a longer battery life and for it to be waterproof.

G
G.

Good

A
A.
Great Communication Device for Kids

My daughter just started high school, which involved her now traveling, as previously the primary school was only around the corner. I was hesitant to give her a full normal phone, but then I stumbled upon Spacetalk, did some research and was impressed, so bought one. Haven't looked back, and my Daughter is happy to have it as well. Well worth the investment.

R
R.
Great alternative for kids not yet ready for a phone

Love being able to contact my kids whenever I need to and the comfort it gives us that they can contact us in an emergency. Certainly gives us the confidence to allow my kids to have a bit more independence. The only disappointing thing is the short battery life.